 |
The HWM-11K Hot
Water Machine is an extremely compact design
intended to allow installation inside interior
or exterior walls using 2 x 4 (min.) studs in
16” (min.) centers, and standard ½” thick
drywall. Zero floor space is required. The
HWM-11K can also be mounted on the surface of
any interior wall. |
|
|
The HWM-11K Hot
Water Machine is bi-directional. It can be piped
so that the water flows in either direction. |
|
|
Low energy usage.
The HWM-11K Hot Water Machine consumes only
37,500 BTU/Hr, compared with 180,000 BTU/Hr for
the typical gas fired “Instant ON” hot water
heater. |
|
|
NO natural gas or
propane lines to run. |
|
|
NO explosion hazard. |
|
|
NO “venting” of
poisonous combustion products is required. |
|
|
Suspend Mode, when
activated, allows the owner to limit the length
of time the HWM-11K is in the ON mode, thus
conserving energy and water. |
|
|
An optional load
control panel allows unnecessary electrical
loads to be turned OFF at the breaker/fuse panel
when hot water is being produced. |